The Brothers That Just Do Gutters · Irvine
Coastal Salt Air Gutters from Newport Beach to San Clemente
Which gutter metals hold up in the marine layer, why hangers and screws wear out before the trough does, and how rinsing and stainless mesh keep a beach-town roofline draining.
- Locally Owned in South County
- Aluminum and Copper Formed On Site
- Corona del Mar to Capistrano Beach
The Brothers That Just Do Gutters
Irvine
- Metal matched to how close you live to the water
- Every bracket and screw checked for salt wear
- Stainless BroGuard mesh that will not rust out
- Written estimates, free and itemized
Quick answer
Gutters for salt air on the South Orange County coast: Close to the ocean, The Brothers That Just Do Gutters Irvine steers homeowners toward seamless aluminum or copper, since aluminum does not rust and copper’s patina protects it, and hangs each run with hardware picked for salt air rather than plain steel screws. Stainless BroGuard micro-mesh keeps sand and grit out. Rinse the metal now and then, and have the brackets checked at every cleaning. Call (949) 994-4410 or book online.
Coastal Gutter Guide
What salt air does to a gutter, and where it starts
Live a few blocks from the sand in Newport Beach, Newport Heights, Corona del Mar, Newport Coast or Laguna Beach and you already know the routine: a damp gray morning, a film on the windows by noon, and patio furniture that never quite looks new. Your gutters live in that same air every day of the year. Salt settles on the metal, the marine fog keeps it moist, and the corrosion goes to work on whatever gives it the easiest opening.
That opening is rarely the trough. A seamless aluminum run can look nearly new after years near the water while the parts holding it up are failing. Screws, spikes, hanger clips, rivets and end caps are where we find the damage on homes in Dana Point, Capistrano Beach and San Clemente. Once a few hangers let go, the run loses its pitch, water sits in the low spots, and the gutter begins to sag away from the fascia. From the sidewalk it can look fine right up until a winter storm proves otherwise.
So a coastal gutter job is really three choices: the metal for the trough, the hardware that holds it, and the routine that keeps salt and grit from sitting on both. Sara Baayoun’s crews install seamless gutters formed on site and make all three choices with you before anything goes up. If your house also sits on a bluff or a slope, the other half of the story is where the water ends up, which our South County bluff and hillside drainage guide covers.
Book a Free Coastal Gutter CheckOn a coastal estimate we look at
- Distance to the water and how much spray the roof takes
- Rust at hangers, screws, spikes and end caps
- Low spots where water and grit sit between storms
- Soft fascia behind the run
- Copper and aluminum touching at a joint
- Where each downspout empties
Metal by Metal
How each gutter metal handles the marine layer
The metals we form for South County homes, and what living near the ocean means for each.
- Seamless aluminum
- Will not rustAluminum resists rust on its own and the baked finish adds a barrier, which is why it is our everyday pick a short walk from the beach.
- Copper
- Greens soonerSalty air speeds up the patina. That green layer shields the copper from further corrosion, so the color shift is protection, not failure.
- Galvalume
- Edge rust stopsSteel strength under an aluminum zinc coating. A cut edge can show some rust, and the aluminum in the coating keeps it from spreading.
- Bonderized and galvanized steel
- Better inlandStrong and paintable, and a fine fit a few miles from the coast, but constant salt air is hard on steel over the years.
- Our recommendation
- Aluminum or copperOn homes that take spray, choose aluminum or copper, hang it with coastal hardware and cover it with stainless mesh.
Based on the material guidance on our specialty gutter pages and what our crews find on coastal service calls from Newport Beach to San Clemente. We do not put a number of years on any metal near the ocean: exposure varies too much from one street to the next.
Hardware, joints and upkeep
The small parts that decide how long a coastal gutter lasts
Hangers and screws. We hang coastal runs on hidden hangers with fasteners chosen for ocean air, never plain steel screws, which rust quickly in the fog. On a repair call, swapping corroded hardware and restoring the pitch often saves a trough that still has plenty of life in it. Our repair crews do that on homes from Newport Beach down to Laguna Niguel.
Mixed metals. Copper and aluminum should not touch. Where they meet, at a patch, a strap or a downspout, the joint corrodes faster, and salt moisture speeds that up. If you want copper accents on an aluminum house, tell us up front so the plan keeps them apart. Our gutter styles page shows the half-round and K-style profiles.
Rinsing and guards. Rain rinses most exposed runs in winter, but sections tucked under deep eaves stay coated, so give them a gentle hose rinse now and then. A gutter guard matters here too: BroGuard is stainless micro-mesh that holds up in sea air, and the BroGuard warranty covers the mesh for life against defects. Pair it with our maintenance program and every visit includes a bracket check. Before winter, our El Niño prep guide covers the storm side, and underground drainage handles where the water goes.
Our coastal town pages
Services
Gutter Work Built for Salt Air
From the metal you choose to the screw that holds it, each piece is picked for the coast.
Light, rust-proof and made on our truck in the trim color you want, so nothing needs painting later.
Learn more Copper Gutter InstallationHalf-round or K-style copper for custom and Mediterranean homes, left to weather to its own patina.
Learn more Coastal Gutter RepairCorroded hangers, rusted screws and drooping runs rehung on fresh hardware with the pitch restored.
Learn more BroGuard Stainless MeshFine stainless micro-mesh that stops sand, grit and palm litter and stands up to the sea air.
Learn more Gutter CleaningSand, salty sludge and leaves scooped out, then every downspout flushed and checked.
Learn more Fascia BoardBoard softened by years of salt and overflow replaced, so new hangers bite into sound wood.
Learn moreHow it works
How we handle a coastal gutter job
- 1Tell us where you are
Call (949) 994-4410 or book online. Your street and how close you sit to the water shape the advice.
- 2Bracket by bracket
A Solutionist checks hangers, screws and end caps along the whole run, not only the parts you see.
- 3Metal and hardware on paper
Your free estimate names the metal, the size and the hardware, with repair and replacement priced apart.
- 4Formed at the curb
Each run is cut to length on our truck, hung on fresh hardware and flushed before we pack up.
Why the Brothers
Why Beach-Town Homeowners Call the Brothers
The gutter can look fine while every bracket behind it is rusting. We check the hardware first.
One continuous run per wall leaves fewer joints where damp, salty air can work its way in.
If steel is the wrong call for your street, we will say so, even if it was the metal you had in mind.
Sara Baayoun owns the Irvine franchise, and her South County team answers (949) 994-4410.
Year-round
A salt air gutter routine through the year
Coastal gutters need a little attention in every season, not just before the rain.
- Fall · Sep to NovClean and inspect
Sand, grit and leaves out, downspouts flushed and every rusty bracket swapped while it is still dry.
- Winter · Dec to MarLet the rain help
Storms rinse the exposed metal for you. Watch for spilling corners and runs that sag when they fill.
- Spring · Apr to MayRinse what rain missed
Hose down runs tucked under deep eaves and porch roofs, where salt builds up because rain never reaches it.
- Summer · Jun to AugUpgrade season
Long dry days suit new seamless runs, a switch to aluminum or copper and fresh coastal hardware.
The Work
Metal, Hardware and Mesh From Our South County Crew



Reviews
What South Orange County Homeowners Say
“The whole experience was first rate. They stuck with their quote, showed up on time did the work expeditiously and did a quality job. What else is there?”
Posted on Google“Steve installed new gutters today and was such a professional about the work. He came on time, finished on time, explained everything as he was doing it and clearly is a gutter specialist. I highly recommend him for any gutter work that’s needed.”
Posted on Google“Quality service and friendly people. They were fast and solved my problem with expertise. Would recommend at any time.”
Posted on GoogleSalt Air Gutter Questions for the South County Coast
For homes that take ocean spray, we recommend seamless aluminum or copper. Aluminum does not rust and comes in factory colors, and copper builds a patina that protects it. Steel options are strong but salt air is hard on them over time. Just as important is the hardware: hangers and screws chosen for the coast, checked at every cleaning.
Yes. We form copper gutters on site in half-round and K-style for homes in Newport Beach, Corona del Mar, Laguna Beach and down the coast. Near the water the copper turns green sooner than it would inland. That patina is a protective layer, not damage, and it does not need paint.
The stainless we install is BroGuard stainless micro-mesh over the gutter, not a stainless trough. For the gutter itself we form colored aluminum, copper, bonderized steel and galvalume on site. Near the coast we usually suggest aluminum or copper under the stainless mesh, which gives you rust-proof metal and a guard that stands up to salt.
The only guard our Irvine location installs is BroGuard stainless micro-mesh. Its openings are fine enough to stop sand, coastal grit, pine needles and palm litter at the surface while rain runs straight through, and the stainless steel holds up in sea air. BroGuard backs the mesh for life against factory defects.
Now and then is enough for most homes. Rain rinses the exposed runs each winter, so focus on sections under deep eaves or porch roofs that stay dry, and rinse after long dry spells. Use a gentle hose, not a pressure washer. Book a cleaning before the rainy season so a Solutionist can check the brackets too.
Usually the hardware, not the gutter. Salt and the marine layer rust screws, spikes and hanger clips long before an aluminum trough shows wear. As they let go, the run loses its slope, holds water and pulls away from the fascia. We rehang it on fresh coastal hardware and replace any soft fascia behind it.
Service area
More South Orange County communities we serve
Every community on this list is inside our service area and gets the same local crew, on-site seamless gutters and free written estimates. Cities with an arrow have their own local page. Call (949) 994-4410 or request a free quote and a Solutionist will come out.
- Aliso Viejo
- Capistrano Beach
- Costa Mesa
- Coto de Caza
- Dana Point
- Foothill Ranch
- Irvine HOA Gutter Approval Guide
- Ladera Ranch
- Laguna Beach
- Laguna Hills
- Laguna Niguel
- Laguna Woods
- Lake Forest
- Mission Viejo
- Newport Beach
- Newport Coast
- Rancho Santa Margarita
- San Clemente
- San Juan Capistrano
- Trabuco Canyon
Free estimates
Get a coastal gutter check before the brackets give out
A Solutionist will check each hanger and screw, point out where salt is winning and write up metal, hardware and mesh on one free estimate.
Coastal service from Corona del Mar to Capistrano Beach · The Brothers That Just Do Gutters, Irvine office · (949) 994-4410
♿
Bigger Text
Biggest Text
Text Spacing
Readable Font
Highlight Links
Highlight Titles
Big Cursor
High Contrast
Invert Colors
Grayscale
Pause Motion
Licensed, Bonded & Insured · California Contractor License #1145336

Gutters on Tile Roofs in Irvine and South Orange County
Rain Barrels in Irvine: Rebates, Rules and the Gutters You Need
Can Clogged Gutters Breed Mosquitoes? A South OC Homeowner Guide